User Contributed                                           MET/CAL PROCEDURE
=============================================================================
INSTRUMENT:            Electronic Research 2600S:Digital Timer
DATE:                  14-Dec-97
AUTHOR:                User Contributed
REVISION:              0
ADJUSTMENT THRESHOLD:  70%
NUMBER OF TESTS:       5
NUMBER OF LINES:       40
CONFIGURATION:         HP 5335A
STANDARD:              Stanford Research FS700
=============================================================================
 STEP    FSC    RANGE NOMINAL        TOLERANCE     MOD1        MOD2  3  4 CON
  1.001  ASK-                        P                            F
  1.002  ASK+                                          X
  1.003  HEAD         * INITIAL CONDITIONS *
  1.004  STD          Stanford Research FS700
  1.005  DISP         Connect the UUT to the appropriate AC source and allow
  1.005  DISP         a 10 minute warm-up.
  1.006  HEAD         {* TIMEBASE ACCURACY TEST *}
  1.007  DISP         Connect the UUT 1MHz CLOCK output to the 5335A INPUT A.
  1.008  IEEE         [@5335] [TERM LF]
  1.009  IEEE         [@5335] IN[D2000];
  1.010  IEEE         [@5335] FN1,AU1,AX1;
  1.011  DISP         Press the UUT START button.
  1.012  IEEE         [@5335] [D5000][I]
  1.013  MEM/         1000000
  1.014  ACC          1.00000000MH   1P%
  1.015  MEME
  1.016  MEMC         MH             0.000005U
  2.001  HEAD         {}
  2.002  HEAD         {* FUNCTION TEST *}
  2.003  DISP         Press the UUT {STOP button}.
  2.004  EVAL   {Did display stop counting and hold count?}
  3.001  DISP         Press the UUT {START button}.
  3.002  EVAL   {Did display start counting from held count?}
  4.001  DISP         Press the UUT STOP button.
  4.002  DISP         Press the UUT {RESET button}.
  4.003  EVAL   {Did display reset to all zeros?}
  5.001  END